ExcelPTZ PTZ605 series Manual de Instruções descarregar pdf (Página 42)

CAM ID SETUP (3)

This enters the software ID settings menu

CAMERA S/N:

Displays the dome series number

INPUT S/N:

Inputs the dome series number.

*OLD ID:

Displays the old dome address.

NEW ID:

Displays the new dome address. Input the series number before inputting the new address.

SAVE & RETURN

To save and return to the ADVANCE SETUP menu.

CANCEL & RETURN

To cancel and return to the ADVANCE SETUP menu.

*ID CHANGE

This is the long distance dome address setting. The Camera serial number is a 7 bit non-modifiable

Serial number. Set the Input Serial number to the same as the Camera serial number using the

joystick. The OLD ID known as the HID (Hardware ID) displays the old dome address and is non-

modifiable. The NEW ID known as the SID (Software ID) is the new dome address.

Note that if the INPUT S/N is not correctly entered in advance of this entry, an error

“S/N ERROR!” will be displayed at bottom of display screen. Also the dome ID address range

allows 1 ~ 999 to be addressed but different protocols limit the software (SID) addressable range.

The PELCO protocol allows the 1 ~ 255 (SID) address range to be allocated. To specify an address

outside this range, set the address using the HID (dipswitch) and power down then up. The dome

will then set the HID = SID. Save & Return saves the new setting and returns to the previous menu

or Cancel & Return does not save the setting and returns to the previous menu.

CAM ID SETUP

CAMERA S/N: 0001

INPUT S/N: 0001

OLD ID 001

NEW ID 001

SAVE & RETURN

CANCEL & RETURN

MAIN MENU

1. SYSTEM SETUP

2. DISPLAY SETUP

3. CAMERA SETUP

4. MOTION SETUP

5. PRIVACY MASK

6. ADVANCE SETUP

7. SYSTEM RESET

8. EXIT

ADVANCE SETUP

<HOME SETUP> (1)

<PASSWORD> (2)

<CAM ID SETUP> (3)

<FAN CONTROL> (4)

LANGUAGE ENG

SET NORTH POSITION

RETURN

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 57 58

Comentários a estes Manuais

Sem comentários

ExcelPTZ PTZ605 series Manual de Instruções Página 42

Comentários a estes Manuais